trAvis - MANAGER

Edit File: gioenums.h

/* GIO - GLib Input, Output and Streaming Library * * Copyright (C) 2006-2007 Red Hat, Inc. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General * Public License along with this library; if not, see <http://www.gnu.org/licenses/>. * * Author: Alexander Larsson <alexl@redhat.com> */ #ifndef __GIO_ENUMS_H__ #define __GIO_ENUMS_H__ #if !defined (__GIO_GIO_H_INSIDE__) && !defined (GIO_COMPILATION) #error "Only <gio/gio.h> can be included directly." #endif #include <glib-object.h> G_BEGIN_DECLS /** * GAppInfoCreateFlags: * @G_APP_INFO_CREATE_NONE: No flags. * @G_APP_INFO_CREATE_NEEDS_TERMINAL: Application opens in a terminal window. * @G_APP_INFO_CREATE_SUPPORTS_URIS: Application supports URI arguments. * @G_APP_INFO_CREATE_SUPPORTS_STARTUP_NOTIFICATION: Application supports startup notification. Since 2.26 * * Flags used when creating a #GAppInfo. */ typedef enum { G_APP_INFO_CREATE_NONE = 0, /*< nick=none >*/ G_APP_INFO_CREATE_NEEDS_TERMINAL = (1 << 0), /*< nick=needs-terminal >*/ G_APP_INFO_CREATE_SUPPORTS_URIS = (1 << 1), /*< nick=supports-uris >*/ G_APP_INFO_CREATE_SUPPORTS_STARTUP_NOTIFICATION = (1 << 2) /*< nick=supports-startup-notification >*/ } GAppInfoCreateFlags; /** * GConverterFlags: * @G_CONVERTER_NO_FLAGS: No flags. * @G_CONVERTER_INPUT_AT_END: At end of input data * @G_CONVERTER_FLUSH: Flush data * * Flags used when calling a g_converter_convert(). * * Since: 2.24 */ typedef enum { G_CONVERTER_NO_FLAGS = 0, /*< nick=none >*/ G_CONVERTER_INPUT_AT_END = (1 << 0), /*< nick=input-at-end >*/ G_CONVERTER_FLUSH = (1 << 1) /*< nick=flush >*/ } GConverterFlags; /** * GConverterResult: * @G_CONVERTER_ERROR: There was an error during conversion. * @G_CONVERTER_CONVERTED: Some data was consumed or produced * @G_CONVERTER_FINISHED: The conversion is finished * @G_CONVERTER_FLUSHED: Flushing is finished * * Results returned from g_converter_convert(). * * Since: 2.24 */ typedef enum { G_CONVERTER_ERROR = 0, /*< nick=error >*/ G_CONVERTER_CONVERTED = 1, /*< nick=converted >*/ G_CONVERTER_FINISHED = 2, /*< nick=finished >*/ G_CONVERTER_FLUSHED = 3 /*< nick=flushed >*/ } GConverterResult; /** * GDataStreamByteOrder: * @G_DATA_STREAM_BYTE_ORDER_BIG_ENDIAN: Selects Big Endian byte order. * @G_DATA_STREAM_BYTE_ORDER_LITTLE_ENDIAN: Selects Little Endian byte order. * @G_DATA_STREAM_BYTE_ORDER_HOST_ENDIAN: Selects endianness based on host machine's architecture. * * #GDataStreamByteOrder is used to ensure proper endianness of streaming data sources * across various machine architectures. * **/ typedef enum { G_DATA_STREAM_BYTE_ORDER_BIG_ENDIAN, G_DATA_STREAM_BYTE_ORDER_LITTLE_ENDIAN, G_DATA_STREAM_BYTE_ORDER_HOST_ENDIAN } GDataStreamByteOrder; /** * GDataStreamNewlineType: * @G_DATA_STREAM_NEWLINE_TYPE_LF: Selects "LF" line endings, common on most modern UNIX platforms. * @G_DATA_STREAM_NEWLINE_TYPE_CR: Selects "CR" line endings. * @G_DATA_STREAM_NEWLINE_TYPE_CR_LF: Selects "CR, LF" line ending, common on Microsoft Windows. * @G_DATA_STREAM_NEWLINE_TYPE_ANY: Automatically try to handle any line ending type. * * #GDataStreamNewlineType is used when checking for or setting the line endings for a given file. **/ typedef enum { G_DATA_STREAM_NEWLINE_TYPE_LF, G_DATA_STREAM_NEWLINE_TYPE_CR, G_DATA_STREAM_NEWLINE_TYPE_CR_LF, G_DATA_STREAM_NEWLINE_TYPE_ANY } GDataStreamNewlineType; /** * GFileAttributeType: * @G_FILE_ATTRIBUTE_TYPE_INVALID: indicates an invalid or uninitalized type. * @G_FILE_ATTRIBUTE_TYPE_STRING: a null terminated UTF8 string. * @G_FILE_ATTRIBUTE_TYPE_BYTE_STRING: a zero terminated string of non-zero bytes. * @G_FILE_ATTRIBUTE_TYPE_BOOLEAN: a boolean value. * @G_FILE_ATTRIBUTE_TYPE_UINT32: an unsigned 4-byte/32-bit integer. * @G_FILE_ATTRIBUTE_TYPE_INT32: a signed 4-byte/32-bit integer. * @G_FILE_ATTRIBUTE_TYPE_UINT64: an unsigned 8-byte/64-bit integer. * @G_FILE_ATTRIBUTE_TYPE_INT64: a signed 8-byte/64-bit integer. * @G_FILE_ATTRIBUTE_TYPE_OBJECT: a #GObject. * @G_FILE_ATTRIBUTE_TYPE_STRINGV: a %NULL terminated char **. Since 2.22 * * The data types for file attributes. **/ typedef enum { G_FILE_ATTRIBUTE_TYPE_INVALID = 0, G_FILE_ATTRIBUTE_TYPE_STRING, G_FILE_ATTRIBUTE_TYPE_BYTE_STRING, /* zero terminated string of non-zero bytes */ G_FILE_ATTRIBUTE_TYPE_BOOLEAN, G_FILE_ATTRIBUTE_TYPE_UINT32, G_FILE_ATTRIBUTE_TYPE_INT32, G_FILE_ATTRIBUTE_TYPE_UINT64, G_FILE_ATTRIBUTE_TYPE_INT64, G_FILE_ATTRIBUTE_TYPE_OBJECT, G_FILE_ATTRIBUTE_TYPE_STRINGV } GFileAttributeType; /** * GFileAttributeInfoFlags: * @G_FILE_ATTRIBUTE_INFO_NONE: no flags set. * @G_FILE_ATTRIBUTE_INFO_COPY_WITH_FILE: copy the attribute values when the file is copied. * @G_FILE_ATTRIBUTE_INFO_COPY_WHEN_MOVED: copy the attribute values when the file is moved. * * Flags specifying the behaviour of an attribute. **/ typedef enum { G_FILE_ATTRIBUTE_INFO_NONE = 0, G_FILE_ATTRIBUTE_INFO_COPY_WITH_FILE = (1 << 0), G_FILE_ATTRIBUTE_INFO_COPY_WHEN_MOVED = (1 << 1) } GFileAttributeInfoFlags; /** * GFileAttributeStatus: * @G_FILE_ATTRIBUTE_STATUS_UNSET: Attribute value is unset (empty). * @G_FILE_ATTRIBUTE_STATUS_SET: Attribute value is set. * @G_FILE_ATTRIBUTE_STATUS_ERROR_SETTING: Indicates an error in setting the value. * * Used by g_file_set_attributes_from_info() when setting file attributes. **/ typedef enum { G_FILE_ATTRIBUTE_STATUS_UNSET = 0, G_FILE_ATTRIBUTE_STATUS_SET, G_FILE_ATTRIBUTE_STATUS_ERROR_SETTING } GFileAttributeStatus; /** * GFileQueryInfoFlags: * @G_FILE_QUERY_INFO_NONE: No flags set. * @G_FILE_QUERY_INFO_NOFOLLOW_SYMLINKS: Don't follow symlinks. * * Flags used when querying a #GFileInfo. */ typedef enum { G_FILE_QUERY_INFO_NONE = 0, G_FILE_QUERY_INFO_NOFOLLOW_SYMLINKS = (1 << 0) /*< nick=nofollow-symlinks >*/ } GFileQueryInfoFlags; /** * GFileCreateFlags: * @G_FILE_CREATE_NONE: No flags set. * @G_FILE_CREATE_PRIVATE: Create a file that can only be * accessed by the current user. * @G_FILE_CREATE_REPLACE_DESTINATION: Replace the destination * as if it didn't exist before. Don't try to keep any old * permissions, replace instead of following links. This * is generally useful if you're doing a "copy over" * rather than a "save new version of" replace operation. * You can think of it as "unlink destination" before * writing to it, although the implementation may not * be exactly like that. Since 2.20 * * Flags used when an operation may create a file. */ typedef enum { G_FILE_CREATE_NONE = 0, G_FILE_CREATE_PRIVATE = (1 << 0), G_FILE_CREATE_REPLACE_DESTINATION = (1 << 1) } GFileCreateFlags; /** * GFileMeasureFlags: * @G_FILE_MEASURE_NONE: No flags set. * @G_FILE_MEASURE_REPORT_ANY_ERROR: Report any error encountered * while traversing the directory tree. Normally errors are only * reported for the toplevel file. * @G_FILE_MEASURE_APPARENT_SIZE: Tally usage based on apparent file * sizes. Normally, the block-size is used, if available, as this is a * more accurate representation of disk space used. * Compare with `du --apparent-size`. * @G_FILE_MEASURE_NO_XDEV: Do not cross mount point boundaries. * Compare with `du -x`. * * Flags that can be used with g_file_measure_disk_usage(). * * Since: 2.38 **/ typedef enum { G_FILE_MEASURE_NONE = 0, G_FILE_MEASURE_REPORT_ANY_ERROR = (1 << 1), G_FILE_MEASURE_APPARENT_SIZE = (1 << 2), G_FILE_MEASURE_NO_XDEV = (1 << 3) } GFileMeasureFlags; /** * GMountMountFlags: * @G_MOUNT_MOUNT_NONE: No flags set. * * Flags used when mounting a mount. */ typedef enum /*< flags >*/ { G_MOUNT_MOUNT_NONE = 0 } GMountMountFlags; /** * GMountUnmountFlags: * @G_MOUNT_UNMOUNT_NONE: No flags set. * @G_MOUNT_UNMOUNT_FORCE: Unmount even if there are outstanding * file operations on the mount. * * Flags used when an unmounting a mount. */ typedef enum { G_MOUNT_UNMOUNT_NONE = 0, G_MOUNT_UNMOUNT_FORCE = (1 << 0) } GMountUnmountFlags; /** * GDriveStartFlags: * @G_DRIVE_START_NONE: No flags set. * * Flags used when starting a drive. * * Since: 2.22 */ typedef enum /*< flags >*/ { G_DRIVE_START_NONE = 0 } GDriveStartFlags; /** * GDriveStartStopType: * @G_DRIVE_START_STOP_TYPE_UNKNOWN: Unknown or drive doesn't support * start/stop. * @G_DRIVE_START_STOP_TYPE_SHUTDOWN: The stop method will physically * shut down the drive and e.g. power down the port the drive is * attached to. * @G_DRIVE_START_STOP_TYPE_NETWORK: The start/stop methods are used * for connecting/disconnect to the drive over the network. * @G_DRIVE_START_STOP_TYPE_MULTIDISK: The start/stop methods will * assemble/disassemble a virtual drive from several physical * drives. * @G_DRIVE_START_STOP_TYPE_PASSWORD: The start/stop methods will * unlock/lock the disk (for example using the ATA <quote>SECURITY * UNLOCK DEVICE</quote> command) * * Enumeration describing how a drive can be started/stopped. * * Since: 2.22 */ typedef enum { G_DRIVE_START_STOP_TYPE_UNKNOWN, G_DRIVE_START_STOP_TYPE_SHUTDOWN, G_DRIVE_START_STOP_TYPE_NETWORK, G_DRIVE_START_STOP_TYPE_MULTIDISK, G_DRIVE_START_STOP_TYPE_PASSWORD } GDriveStartStopType; /** * GFileCopyFlags: * @G_FILE_COPY_NONE: No flags set. * @G_FILE_COPY_OVERWRITE: Overwrite any existing files * @G_FILE_COPY_BACKUP: Make a backup of any existing files. * @G_FILE_COPY_NOFOLLOW_SYMLINKS: Don't follow symlinks. * @G_FILE_COPY_ALL_METADATA: Copy all file metadata instead of just default set used for copy (see #GFileInfo). * @G_FILE_COPY_NO_FALLBACK_FOR_MOVE: Don't use copy and delete fallback if native move not supported. * @G_FILE_COPY_TARGET_DEFAULT_PERMS: Leaves target file with default perms, instead of setting the source file perms. * * Flags used when copying or moving files. */ typedef enum { G_FILE_COPY_NONE = 0, /*< nick=none >*/ G_FILE_COPY_OVERWRITE = (1 << 0), G_FILE_COPY_BACKUP = (1 << 1), G_FILE_COPY_NOFOLLOW_SYMLINKS = (1 << 2), G_FILE_COPY_ALL_METADATA = (1 << 3), G_FILE_COPY_NO_FALLBACK_FOR_MOVE = (1 << 4), G_FILE_COPY_TARGET_DEFAULT_PERMS = (1 << 5) } GFileCopyFlags; /** * GFileMonitorFlags: * @G_FILE_MONITOR_NONE: No flags set. * @G_FILE_MONITOR_WATCH_MOUNTS: Watch for mount events. * @G_FILE_MONITOR_SEND_MOVED: Pair DELETED and CREATED events caused * by file renames (moves) and send a single G_FILE_MONITOR_EVENT_MOVED * event instead (NB: not supported on all backends; the default * behaviour -without specifying this flag- is to send single DELETED * and CREATED events). Deprecated since 2.46: use * %G_FILE_MONITOR_WATCH_MOVES instead. * @G_FILE_MONITOR_WATCH_HARD_LINKS: Watch for changes to the file made * via another hard link. Since 2.36. * @G_FILE_MONITOR_WATCH_MOVES: Watch for rename operations on a * monitored directory. This causes %G_FILE_MONITOR_EVENT_RENAMED, * %G_FILE_MONITOR_EVENT_MOVED_IN and %G_FILE_MONITOR_EVENT_MOVED_OUT * events to be emitted when possible. Since: 2.46. * * Flags used to set what a #GFileMonitor will watch for. */ typedef enum { G_FILE_MONITOR_NONE = 0, G_FILE_MONITOR_WATCH_MOUNTS = (1 << 0), G_FILE_MONITOR_SEND_MOVED = (1 << 1), G_FILE_MONITOR_WATCH_HARD_LINKS = (1 << 2), G_FILE_MONITOR_WATCH_MOVES = (1 << 3) } GFileMonitorFlags; /** * GFileType: * @G_FILE_TYPE_UNKNOWN: File's type is unknown. * @G_FILE_TYPE_REGULAR: File handle represents a regular file. * @G_FILE_TYPE_DIRECTORY: File handle represents a directory. * @G_FILE_TYPE_SYMBOLIC_LINK: File handle represents a symbolic link * (Unix systems). * @G_FILE_TYPE_SPECIAL: File is a "special" file, such as a socket, fifo, * block device, or character device. * @G_FILE_TYPE_SHORTCUT: File is a shortcut (Windows systems). * @G_FILE_TYPE_MOUNTABLE: File is a mountable location. * * Indicates the file's on-disk type. **/ typedef enum { G_FILE_TYPE_UNKNOWN = 0, G_FILE_TYPE_REGULAR, G_FILE_TYPE_DIRECTORY, G_FILE_TYPE_SYMBOLIC_LINK, G_FILE_TYPE_SPECIAL, /* socket, fifo, blockdev, chardev */ G_FILE_TYPE_SHORTCUT, G_FILE_TYPE_MOUNTABLE } GFileType; /** * GFilesystemPreviewType: * @G_FILESYSTEM_PREVIEW_TYPE_IF_ALWAYS: Only preview files if user has explicitly requested it. * @G_FILESYSTEM_PREVIEW_TYPE_IF_LOCAL: Preview files if user has requested preview of "local" files. * @G_FILESYSTEM_PREVIEW_TYPE_NEVER: Never preview files. * * Indicates a hint from the file system whether files should be * previewed in a file manager. Returned as the value of the key * #G_FILE_ATTRIBUTE_FILESYSTEM_USE_PREVIEW. **/ typedef enum { G_FILESYSTEM_PREVIEW_TYPE_IF_ALWAYS = 0, G_FILESYSTEM_PREVIEW_TYPE_IF_LOCAL, G_FILESYSTEM_PREVIEW_TYPE_NEVER } GFilesystemPreviewType; /** * GFileMonitorEvent: * @G_FILE_MONITOR_EVENT_CHANGED: a file changed. * @G_FILE_MONITOR_EVENT_CHANGES_DONE_HINT: a hint that this was probably the last change in a set of changes. * @G_FILE_MONITOR_EVENT_DELETED: a file was deleted. * @G_FILE_MONITOR_EVENT_CREATED: a file was created. * @G_FILE_MONITOR_EVENT_ATTRIBUTE_CHANGED: a file attribute was changed. * @G_FILE_MONITOR_EVENT_PRE_UNMOUNT: the file location will soon be unmounted. * @G_FILE_MONITOR_EVENT_UNMOUNTED: the file location was unmounted. * @G_FILE_MONITOR_EVENT_MOVED: the file was moved -- only sent if the * (deprecated) %G_FILE_MONITOR_SEND_MOVED flag is set * @G_FILE_MONITOR_EVENT_RENAMED: the file was renamed within the * current directory -- only sent if the %G_FILE_MONITOR_WATCH_MOVES * flag is set. Since: 2.46. * @G_FILE_MONITOR_EVENT_MOVED_IN: the file was moved into the * monitored directory from another location -- only sent if the * %G_FILE_MONITOR_WATCH_MOVES flag is set. Since: 2.46. * @G_FILE_MONITOR_EVENT_MOVED_OUT: the file was moved out of the * monitored directory to another location -- only sent if the * %G_FILE_MONITOR_WATCH_MOVES flag is set. Since: 2.46 * * Specifies what type of event a monitor event is. **/ typedef enum { G_FILE_MONITOR_EVENT_CHANGED, G_FILE_MONITOR_EVENT_CHANGES_DONE_HINT, G_FILE_MONITOR_EVENT_DELETED, G_FILE_MONITOR_EVENT_CREATED, G_FILE_MONITOR_EVENT_ATTRIBUTE_CHANGED, G_FILE_MONITOR_EVENT_PRE_UNMOUNT, G_FILE_MONITOR_EVENT_UNMOUNTED, G_FILE_MONITOR_EVENT_MOVED, G_FILE_MONITOR_EVENT_RENAMED, G_FILE_MONITOR_EVENT_MOVED_IN, G_FILE_MONITOR_EVENT_MOVED_OUT } GFileMonitorEvent; /* This enumeration conflicts with GIOError in giochannel.h. However, * that is only used as a return value in some deprecated functions. * So, we reuse the same prefix for the enumeration values, but call * the actual enumeration (which is rarely used) GIOErrorEnum. */ /** * GIOErrorEnum: * @G_IO_ERROR_FAILED: Generic error condition for when an operation fails * and no more specific #GIOErrorEnum value is defined. * @G_IO_ERROR_NOT_FOUND: File not found. * @G_IO_ERROR_EXISTS: File already exists. * @G_IO_ERROR_IS_DIRECTORY: File is a directory. * @G_IO_ERROR_NOT_DIRECTORY: File is not a directory. * @G_IO_ERROR_NOT_EMPTY: File is a directory that isn't empty. * @G_IO_ERROR_NOT_REGULAR_FILE: File is not a regular file. * @G_IO_ERROR_NOT_SYMBOLIC_LINK: File is not a symbolic link. * @G_IO_ERROR_NOT_MOUNTABLE_FILE: File cannot be mounted. * @G_IO_ERROR_FILENAME_TOO_LONG: Filename is too many characters. * @G_IO_ERROR_INVALID_FILENAME: Filename is invalid or contains invalid characters. * @G_IO_ERROR_TOO_MANY_LINKS: File contains too many symbolic links. * @G_IO_ERROR_NO_SPACE: No space left on drive. * @G_IO_ERROR_INVALID_ARGUMENT: Invalid argument. * @G_IO_ERROR_PERMISSION_DENIED: Permission denied. * @G_IO_ERROR_NOT_SUPPORTED: Operation (or one of its parameters) not supported * @G_IO_ERROR_NOT_MOUNTED: File isn't mounted. * @G_IO_ERROR_ALREADY_MOUNTED: File is already mounted. * @G_IO_ERROR_CLOSED: File was closed. * @G_IO_ERROR_CANCELLED: Operation was cancelled. See #GCancellable. * @G_IO_ERROR_PENDING: Operations are still pending. * @G_IO_ERROR_READ_ONLY: File is read only. * @G_IO_ERROR_CANT_CREATE_BACKUP: Backup couldn't be created. * @G_IO_ERROR_WRONG_ETAG: File's Entity Tag was incorrect. * @G_IO_ERROR_TIMED_OUT: Operation timed out. * @G_IO_ERROR_WOULD_RECURSE: Operation would be recursive. * @G_IO_ERROR_BUSY: File is busy. * @G_IO_ERROR_WOULD_BLOCK: Operation would block. * @G_IO_ERROR_HOST_NOT_FOUND: Host couldn't be found (remote operations). * @G_IO_ERROR_WOULD_MERGE: Operation would merge files. * @G_IO_ERROR_FAILED_HANDLED: Operation failed and a helper program has * already interacted with the user. Do not display any error dialog. * @G_IO_ERROR_TOO_MANY_OPEN_FILES: The current process has too many files * open and can't open any more. Duplicate descriptors do count toward * this limit. Since 2.20 * @G_IO_ERROR_NOT_INITIALIZED: The object has not been initialized. Since 2.22 * @G_IO_ERROR_ADDRESS_IN_USE: The requested address is already in use. Since 2.22 * @G_IO_ERROR_PARTIAL_INPUT: Need more input to finish operation. Since 2.24 * @G_IO_ERROR_INVALID_DATA: The input data was invalid. Since 2.24 * @G_IO_ERROR_DBUS_ERROR: A remote object generated an error that * doesn't correspond to a locally registered #GError error * domain. Use g_dbus_error_get_remote_error() to extract the D-Bus * error name and g_dbus_error_strip_remote_error() to fix up the * message so it matches what was received on the wire. Since 2.26. * @G_IO_ERROR_HOST_UNREACHABLE: Host unreachable. Since 2.26 * @G_IO_ERROR_NETWORK_UNREACHABLE: Network unreachable. Since 2.26 * @G_IO_ERROR_CONNECTION_REFUSED: Connection refused. Since 2.26 * @G_IO_ERROR_PROXY_FAILED: Connection to proxy server failed. Since 2.26 * @G_IO_ERROR_PROXY_AUTH_FAILED: Proxy authentication failed. Since 2.26 * @G_IO_ERROR_PROXY_NEED_AUTH: Proxy server needs authentication. Since 2.26 * @G_IO_ERROR_PROXY_NOT_ALLOWED: Proxy connection is not allowed by ruleset. * Since 2.26 * @G_IO_ERROR_BROKEN_PIPE: Broken pipe. Since 2.36 * @G_IO_ERROR_CONNECTION_CLOSED: Connection closed by peer. Note that this * is the same code as %G_IO_ERROR_BROKEN_PIPE; before 2.44 some * "connection closed" errors returned %G_IO_ERROR_BROKEN_PIPE, but others * returned %G_IO_ERROR_FAILED. Now they should all return the same * value, which has this more logical name. Since 2.44. * @G_IO_ERROR_NOT_CONNECTED: Transport endpoint is not connected. Since 2.44 * @G_IO_ERROR_MESSAGE_TOO_LARGE: Message too large. Since 2.48. * * Error codes returned by GIO functions. * * Note that this domain may be extended in future GLib releases. In * general, new error codes either only apply to new APIs, or else * replace %G_IO_ERROR_FAILED in cases that were not explicitly * distinguished before. You should therefore avoid writing code like * |[<!-- language="C" --> * if (g_error_matches (error, G_IO_ERROR, G_IO_ERROR_FAILED)) * { * // Assume that this is EPRINTERONFIRE * ... * } * ]| * but should instead treat all unrecognized error codes the same as * #G_IO_ERROR_FAILED. **/ typedef enum { G_IO_ERROR_FAILED, G_IO_ERROR_NOT_FOUND, G_IO_ERROR_EXISTS, G_IO_ERROR_IS_DIRECTORY, G_IO_ERROR_NOT_DIRECTORY, G_IO_ERROR_NOT_EMPTY, G_IO_ERROR_NOT_REGULAR_FILE, G_IO_ERROR_NOT_SYMBOLIC_LINK, G_IO_ERROR_NOT_MOUNTABLE_FILE, G_IO_ERROR_FILENAME_TOO_LONG, G_IO_ERROR_INVALID_FILENAME, G_IO_ERROR_TOO_MANY_LINKS, G_IO_ERROR_NO_SPACE, G_IO_ERROR_INVALID_ARGUMENT, G_IO_ERROR_PERMISSION_DENIED, G_IO_ERROR_NOT_SUPPORTED, G_IO_ERROR_NOT_MOUNTED, G_IO_ERROR_ALREADY_MOUNTED, G_IO_ERROR_CLOSED, G_IO_ERROR_CANCELLED, G_IO_ERROR_PENDING, G_IO_ERROR_READ_ONLY, G_IO_ERROR_CANT_CREATE_BACKUP, G_IO_ERROR_WRONG_ETAG, G_IO_ERROR_TIMED_OUT, G_IO_ERROR_WOULD_RECURSE, G_IO_ERROR_BUSY, G_IO_ERROR_WOULD_BLOCK, G_IO_ERROR_HOST_NOT_FOUND, G_IO_ERROR_WOULD_MERGE, G_IO_ERROR_FAILED_HANDLED, G_IO_ERROR_TOO_MANY_OPEN_FILES, G_IO_ERROR_NOT_INITIALIZED, G_IO_ERROR_ADDRESS_IN_USE, G_IO_ERROR_PARTIAL_INPUT, G_IO_ERROR_INVALID_DATA, G_IO_ERROR_DBUS_ERROR, G_IO_ERROR_HOST_UNREACHABLE, G_IO_ERROR_NETWORK_UNREACHABLE, G_IO_ERROR_CONNECTION_REFUSED, G_IO_ERROR_PROXY_FAILED, G_IO_ERROR_PROXY_AUTH_FAILED, G_IO_ERROR_PROXY_NEED_AUTH, G_IO_ERROR_PROXY_NOT_ALLOWED, G_IO_ERROR_BROKEN_PIPE, G_IO_ERROR_CONNECTION_CLOSED = G_IO_ERROR_BROKEN_PIPE, G_IO_ERROR_NOT_CONNECTED, G_IO_ERROR_MESSAGE_TOO_LARGE } GIOErrorEnum; /** * GAskPasswordFlags: * @G_ASK_PASSWORD_NEED_PASSWORD: operation requires a password. * @G_ASK_PASSWORD_NEED_USERNAME: operation requires a username. * @G_ASK_PASSWORD_NEED_DOMAIN: operation requires a domain. * @G_ASK_PASSWORD_SAVING_SUPPORTED: operation supports saving settings. * @G_ASK_PASSWORD_ANONYMOUS_SUPPORTED: operation supports anonymous users. * * #GAskPasswordFlags are used to request specific information from the * user, or to notify the user of their choices in an authentication * situation. **/ typedef enum { G_ASK_PASSWORD_NEED_PASSWORD = (1 << 0), G_ASK_PASSWORD_NEED_USERNAME = (1 << 1), G_ASK_PASSWORD_NEED_DOMAIN = (1 << 2), G_ASK_PASSWORD_SAVING_SUPPORTED = (1 << 3), G_ASK_PASSWORD_ANONYMOUS_SUPPORTED = (1 << 4) } GAskPasswordFlags; /** * GPasswordSave: * @G_PASSWORD_SAVE_NEVER: never save a password. * @G_PASSWORD_SAVE_FOR_SESSION: save a password for the session. * @G_PASSWORD_SAVE_PERMANENTLY: save a password permanently. * * #GPasswordSave is used to indicate the lifespan of a saved password. * * #Gvfs stores passwords in the Gnome keyring when this flag allows it * to, and later retrieves it again from there. **/ typedef enum { G_PASSWORD_SAVE_NEVER, G_PASSWORD_SAVE_FOR_SESSION, G_PASSWORD_SAVE_PERMANENTLY } GPasswordSave; /** * GMountOperationResult: * @G_MOUNT_OPERATION_HANDLED: The request was fulfilled and the * user specified data is now available * @G_MOUNT_OPERATION_ABORTED: The user requested the mount operation * to be aborted * @G_MOUNT_OPERATION_UNHANDLED: The request was unhandled (i.e. not * implemented) * * #GMountOperationResult is returned as a result when a request for * information is send by the mounting operation. **/ typedef enum { G_MOUNT_OPERATION_HANDLED, G_MOUNT_OPERATION_ABORTED, G_MOUNT_OPERATION_UNHANDLED } GMountOperationResult; /** * GOutputStreamSpliceFlags: * @G_OUTPUT_STREAM_SPLICE_NONE: Do not close either stream. * @G_OUTPUT_STREAM_SPLICE_CLOSE_SOURCE: Close the source stream after * the splice. * @G_OUTPUT_STREAM_SPLICE_CLOSE_TARGET: Close the target stream after * the splice. * * GOutputStreamSpliceFlags determine how streams should be spliced. **/ typedef enum { G_OUTPUT_STREAM_SPLICE_NONE = 0, G_OUTPUT_STREAM_SPLICE_CLOSE_SOURCE = (1 << 0), G_OUTPUT_STREAM_SPLICE_CLOSE_TARGET = (1 << 1) } GOutputStreamSpliceFlags; /** * GIOStreamSpliceFlags: * @G_IO_STREAM_SPLICE_NONE: Do not close either stream. * @G_IO_STREAM_SPLICE_CLOSE_STREAM1: Close the first stream after * the splice. * @G_IO_STREAM_SPLICE_CLOSE_STREAM2: Close the second stream after * the splice. * @G_IO_STREAM_SPLICE_WAIT_FOR_BOTH: Wait for both splice operations to finish * before calling the callback. * * GIOStreamSpliceFlags determine how streams should be spliced. * * Since: 2.28 **/ typedef enum { G_IO_STREAM_SPLICE_NONE = 0, G_IO_STREAM_SPLICE_CLOSE_STREAM1 = (1 << 0), G_IO_STREAM_SPLICE_CLOSE_STREAM2 = (1 << 1), G_IO_STREAM_SPLICE_WAIT_FOR_BOTH = (1 << 2) } GIOStreamSpliceFlags; /** * GEmblemOrigin: * @G_EMBLEM_ORIGIN_UNKNOWN: Emblem of unknown origin * @G_EMBLEM_ORIGIN_DEVICE: Emblem adds device-specific information * @G_EMBLEM_ORIGIN_LIVEMETADATA: Emblem depicts live metadata, such as "readonly" * @G_EMBLEM_ORIGIN_TAG: Emblem comes from a user-defined tag, e.g. set by nautilus (in the future) * * GEmblemOrigin is used to add information about the origin of the emblem * to #GEmblem. * * Since: 2.18 */ typedef enum { G_EMBLEM_ORIGIN_UNKNOWN, G_EMBLEM_ORIGIN_DEVICE, G_EMBLEM_ORIGIN_LIVEMETADATA, G_EMBLEM_ORIGIN_TAG } GEmblemOrigin; /** * GResolverError: * @G_RESOLVER_ERROR_NOT_FOUND: the requested name/address/service was not * found * @G_RESOLVER_ERROR_TEMPORARY_FAILURE: the requested information could not * be looked up due to a network error or similar problem * @G_RESOLVER_ERROR_INTERNAL: unknown error * * An error code used with %G_RESOLVER_ERROR in a #GError returned * from a #GResolver routine. * * Since: 2.22 */ typedef enum { G_RESOLVER_ERROR_NOT_FOUND, G_RESOLVER_ERROR_TEMPORARY_FAILURE, G_RESOLVER_ERROR_INTERNAL } GResolverError; /** * GResolverRecordType: * @G_RESOLVER_RECORD_SRV: lookup DNS SRV records for a domain * @G_RESOLVER_RECORD_MX: lookup DNS MX records for a domain * @G_RESOLVER_RECORD_TXT: lookup DNS TXT records for a name * @G_RESOLVER_RECORD_SOA: lookup DNS SOA records for a zone * @G_RESOLVER_RECORD_NS: lookup DNS NS records for a domain * * The type of record that g_resolver_lookup_records() or * g_resolver_lookup_records_async() should retrieve. The records are returned * as lists of #GVariant tuples. Each record type has different values in * the variant tuples returned. * * %G_RESOLVER_RECORD_SRV records are returned as variants with the signature * '(qqqs)', containing a guint16 with the priority, a guint16 with the * weight, a guint16 with the port, and a string of the hostname. * * %G_RESOLVER_RECORD_MX records are returned as variants with the signature * '(qs)', representing a guint16 with the preference, and a string containing * the mail exchanger hostname. * * %G_RESOLVER_RECORD_TXT records are returned as variants with the signature * '(as)', representing an array of the strings in the text record. * * %G_RESOLVER_RECORD_SOA records are returned as variants with the signature * '(ssuuuuu)', representing a string containing the primary name server, a * string containing the administrator, the serial as a guint32, the refresh * interval as guint32, the retry interval as a guint32, the expire timeout * as a guint32, and the ttl as a guint32. * * %G_RESOLVER_RECORD_NS records are returned as variants with the signature * '(s)', representing a string of the hostname of the name server. * * Since: 2.34 */ typedef enum { G_RESOLVER_RECORD_SRV = 1, G_RESOLVER_RECORD_MX, G_RESOLVER_RECORD_TXT, G_RESOLVER_RECORD_SOA, G_RESOLVER_RECORD_NS } GResolverRecordType; /** * GResourceError: * @G_RESOURCE_ERROR_NOT_FOUND: no file was found at the requested path * @G_RESOURCE_ERROR_INTERNAL: unknown error * * An error code used with %G_RESOURCE_ERROR in a #GError returned * from a #GResource routine. * * Since: 2.32 */ typedef enum { G_RESOURCE_ERROR_NOT_FOUND, G_RESOURCE_ERROR_INTERNAL } GResourceError; /** * GResourceFlags: * @G_RESOURCE_FLAGS_NONE: No flags set. * @G_RESOURCE_FLAGS_COMPRESSED: The file is compressed. * * GResourceFlags give information about a particular file inside a resource * bundle. * * Since: 2.32 **/ typedef enum { G_RESOURCE_FLAGS_NONE = 0, G_RESOURCE_FLAGS_COMPRESSED = (1<<0) } GResourceFlags; /** * GResourceLookupFlags: * @G_RESOURCE_LOOKUP_FLAGS_NONE: No flags set. * * GResourceLookupFlags determine how resource path lookups are handled. * * Since: 2.32 **/ typedef enum /*< flags >*/ { G_RESOURCE_LOOKUP_FLAGS_NONE = 0 } GResourceLookupFlags; /** * GSocketFamily: * @G_SOCKET_FAMILY_INVALID: no address family * @G_SOCKET_FAMILY_IPV4: the IPv4 family * @G_SOCKET_FAMILY_IPV6: the IPv6 family * @G_SOCKET_FAMILY_UNIX: the UNIX domain family * * The protocol family of a #GSocketAddress. (These values are * identical to the system defines %AF_INET, %AF_INET6 and %AF_UNIX, * if available.) * * Since: 2.22 */ typedef enum { G_SOCKET_FAMILY_INVALID, G_SOCKET_FAMILY_UNIX = GLIB_SYSDEF_AF_UNIX, G_SOCKET_FAMILY_IPV4 = GLIB_SYSDEF_AF_INET, G_SOCKET_FAMILY_IPV6 = GLIB_SYSDEF_AF_INET6 } GSocketFamily; /** * GSocketType: * @G_SOCKET_TYPE_INVALID: Type unknown or wrong * @G_SOCKET_TYPE_STREAM: Reliable connection-based byte streams (e.g. TCP). * @G_SOCKET_TYPE_DATAGRAM: Connectionless, unreliable datagram passing. * (e.g. UDP) * @G_SOCKET_TYPE_SEQPACKET: Reliable connection-based passing of datagrams * of fixed maximum length (e.g. SCTP). * * Flags used when creating a #GSocket. Some protocols may not implement * all the socket types. * * Since: 2.22 */ typedef enum { G_SOCKET_TYPE_INVALID, G_SOCKET_TYPE_STREAM, G_SOCKET_TYPE_DATAGRAM, G_SOCKET_TYPE_SEQPACKET } GSocketType; /** * GSocketMsgFlags: * @G_SOCKET_MSG_NONE: No flags. * @G_SOCKET_MSG_OOB: Request to send/receive out of band data. * @G_SOCKET_MSG_PEEK: Read data from the socket without removing it from * the queue. * @G_SOCKET_MSG_DONTROUTE: Don't use a gateway to send out the packet, * only send to hosts on directly connected networks. * * Flags used in g_socket_receive_message() and g_socket_send_message(). * The flags listed in the enum are some commonly available flags, but the * values used for them are the same as on the platform, and any other flags * are passed in/out as is. So to use a platform specific flag, just include * the right system header and pass in the flag. * * Since: 2.22 */ typedef enum /*< flags >*/ { G_SOCKET_MSG_NONE, G_SOCKET_MSG_OOB = GLIB_SYSDEF_MSG_OOB, G_SOCKET_MSG_PEEK = GLIB_SYSDEF_MSG_PEEK, G_SOCKET_MSG_DONTROUTE = GLIB_SYSDEF_MSG_DONTROUTE } GSocketMsgFlags; /** * GSocketProtocol: * @G_SOCKET_PROTOCOL_UNKNOWN: The protocol type is unknown * @G_SOCKET_PROTOCOL_DEFAULT: The default protocol for the family/type * @G_SOCKET_PROTOCOL_TCP: TCP over IP * @G_SOCKET_PROTOCOL_UDP: UDP over IP * @G_SOCKET_PROTOCOL_SCTP: SCTP over IP * * A protocol identifier is specified when creating a #GSocket, which is a * family/type specific identifier, where 0 means the default protocol for * the particular family/type. * * This enum contains a set of commonly available and used protocols. You * can also pass any other identifiers handled by the platform in order to * use protocols not listed here. * * Since: 2.22 */ typedef enum { G_SOCKET_PROTOCOL_UNKNOWN = -1, G_SOCKET_PROTOCOL_DEFAULT = 0, G_SOCKET_PROTOCOL_TCP = 6, G_SOCKET_PROTOCOL_UDP = 17, G_SOCKET_PROTOCOL_SCTP = 132 } GSocketProtocol; /** * GZlibCompressorFormat: * @G_ZLIB_COMPRESSOR_FORMAT_ZLIB: deflate compression with zlib header * @G_ZLIB_COMPRESSOR_FORMAT_GZIP: gzip file format * @G_ZLIB_COMPRESSOR_FORMAT_RAW: deflate compression with no header * * Used to select the type of data format to use for #GZlibDecompressor * and #GZlibCompressor. * * Since: 2.24 */ typedef enum { G_ZLIB_COMPRESSOR_FORMAT_ZLIB, G_ZLIB_COMPRESSOR_FORMAT_GZIP, G_ZLIB_COMPRESSOR_FORMAT_RAW } GZlibCompressorFormat; /** * GUnixSocketAddressType: * @G_UNIX_SOCKET_ADDRESS_INVALID: invalid * @G_UNIX_SOCKET_ADDRESS_ANONYMOUS: anonymous * @G_UNIX_SOCKET_ADDRESS_PATH: a filesystem path * @G_UNIX_SOCKET_ADDRESS_ABSTRACT: an abstract name * @G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED: an abstract name, 0-padded * to the full length of a unix socket name * * The type of name used by a #GUnixSocketAddress. * %G_UNIX_SOCKET_ADDRESS_PATH indicates a traditional unix domain * socket bound to a filesystem path. %G_UNIX_SOCKET_ADDRESS_ANONYMOUS * indicates a socket not bound to any name (eg, a client-side socket, * or a socket created with socketpair()). * * For abstract sockets, there are two incompatible ways of naming * them; the man pages suggest using the entire `struct sockaddr_un` * as the name, padding the unused parts of the %sun_path field with * zeroes; this corresponds to %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED. * However, many programs instead just use a portion of %sun_path, and * pass an appropriate smaller length to bind() or connect(). This is * %G_UNIX_SOCKET_ADDRESS_ABSTRACT. * * Since: 2.26 */ typedef enum { G_UNIX_SOCKET_ADDRESS_INVALID, G_UNIX_SOCKET_ADDRESS_ANONYMOUS, G_UNIX_SOCKET_ADDRESS_PATH, G_UNIX_SOCKET_ADDRESS_ABSTRACT, G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED } GUnixSocketAddressType; /** * GBusType: * @G_BUS_TYPE_STARTER: An alias for the message bus that activated the process, if any. * @G_BUS_TYPE_NONE: Not a message bus. * @G_BUS_TYPE_SYSTEM: The system-wide message bus. * @G_BUS_TYPE_SESSION: The login session message bus. * * An enumeration for well-known message buses. * * Since: 2.26 */ typedef enum { G_BUS_TYPE_STARTER = -1, G_BUS_TYPE_NONE = 0, G_BUS_TYPE_SYSTEM = 1, G_BUS_TYPE_SESSION = 2 } GBusType; /** * GBusNameOwnerFlags: * @G_BUS_NAME_OWNER_FLAGS_NONE: No flags set. * @G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT: Allow another message bus connection to claim the name. * @G_BUS_NAME_OWNER_FLAGS_REPLACE: If another message bus connection owns the name and have * specified #G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT, then take the name from the other connection. * @G_BUS_NAME_OWNER_FLAGS_DO_NOT_QUEUE: If another message bus connection owns the name, immediately * return an error from g_bus_own_name() rather than entering the waiting queue for that name. (Since 2.54) * * Flags used in g_bus_own_name(). * * Since: 2.26 */ typedef enum { G_BUS_NAME_OWNER_FLAGS_NONE = 0, /*< nick=none >*/ G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT = (1<<0), /*< nick=allow-replacement >*/ G_BUS_NAME_OWNER_FLAGS_REPLACE = (1<<1), /*< nick=replace >*/ G_BUS_NAME_OWNER_FLAGS_DO_NOT_QUEUE = (1<<2) /*< nick=do-not-queue >*/ } GBusNameOwnerFlags; /* When adding new flags, their numeric values must currently match those * used in the D-Bus Specification. */ /** * GBusNameWatcherFlags: * @G_BUS_NAME_WATCHER_FLAGS_NONE: No flags set. * @G_BUS_NAME_WATCHER_FLAGS_AUTO_START: If no-one owns the name when * beginning to watch the name, ask the bus to launch an owner for the * name. * * Flags used in g_bus_watch_name(). * * Since: 2.26 */ typedef enum { G_BUS_NAME_WATCHER_FLAGS_NONE = 0, G_BUS_NAME_WATCHER_FLAGS_AUTO_START = (1<<0) } GBusNameWatcherFlags; /** * GDBusProxyFlags: * @G_DBUS_PROXY_FLAGS_NONE: No flags set. * @G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES: Don't load properties. * @G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS: Don't connect to signals on the remote object. * @G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START: If the proxy is for a well-known name, * do not ask the bus to launch an owner during proxy initialization or a method call. * This flag is only meaningful in proxies for well-known names. * @G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES: If set, the property value for any __invalidated property__ will be (asynchronously) retrieved upon receiving the [`PropertiesChanged`](http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-properties) D-Bus signal and the property will not cause emission of the #GDBusProxy::g-properties-changed signal. When the value is received the #GDBusProxy::g-properties-changed signal is emitted for the property along with the retrieved value. Since 2.32. * @G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START_AT_CONSTRUCTION: If the proxy is for a well-known name, * do not ask the bus to launch an owner during proxy initialization, but allow it to be * autostarted by a method call. This flag is only meaningful in proxies for well-known names, * and only if %G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START is not also specified. * * Flags used when constructing an instance of a #GDBusProxy derived class. * * Since: 2.26 */ typedef enum { G_DBUS_PROXY_FLAGS_NONE = 0, G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES = (1<<0), G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS = (1<<1), G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START = (1<<2), G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES = (1<<3), G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START_AT_CONSTRUCTION = (1<<4) } GDBusProxyFlags; /** * GDBusError: * @G_DBUS_ERROR_FAILED: * A generic error; "something went wrong" - see the error message for * more. * @G_DBUS_ERROR_NO_MEMORY: * There was not enough memory to complete an operation. * @G_DBUS_ERROR_SERVICE_UNKNOWN: * The bus doesn't know how to launch a service to supply the bus name * you wanted. * @G_DBUS_ERROR_NAME_HAS_NO_OWNER: * The bus name you referenced doesn't exist (i.e. no application owns * it). * @G_DBUS_ERROR_NO_REPLY: * No reply to a message expecting one, usually means a timeout occurred. * @G_DBUS_ERROR_IO_ERROR: * Something went wrong reading or writing to a socket, for example. * @G_DBUS_ERROR_BAD_ADDRESS: * A D-Bus bus address was malformed. * @G_DBUS_ERROR_NOT_SUPPORTED: * Requested operation isn't supported (like ENOSYS on UNIX). * @G_DBUS_ERROR_LIMITS_EXCEEDED: * Some limited resource is exhausted. * @G_DBUS_ERROR_ACCESS_DENIED: * Security restrictions don't allow doing what you're trying to do. * @G_DBUS_ERROR_AUTH_FAILED: * Authentication didn't work. * @G_DBUS_ERROR_NO_SERVER: * Unable to connect to server (probably caused by ECONNREFUSED on a * socket). * @G_DBUS_ERROR_TIMEOUT: * Certain timeout errors, possibly ETIMEDOUT on a socket. Note that * %G_DBUS_ERROR_NO_REPLY is used for message reply timeouts. Warning: * this is confusingly-named given that %G_DBUS_ERROR_TIMED_OUT also * exists. We can't fix it for compatibility reasons so just be * careful. * @G_DBUS_ERROR_NO_NETWORK: * No network access (probably ENETUNREACH on a socket). * @G_DBUS_ERROR_ADDRESS_IN_USE: * Can't bind a socket since its address is in use (i.e. EADDRINUSE). * @G_DBUS_ERROR_DISCONNECTED: * The connection is disconnected and you're trying to use it. * @G_DBUS_ERROR_INVALID_ARGS: * Invalid arguments passed to a method call. * @G_DBUS_ERROR_FILE_NOT_FOUND: * Missing file. * @G_DBUS_ERROR_FILE_EXISTS: * Existing file and the operation you're using does not silently overwrite. * @G_DBUS_ERROR_UNKNOWN_METHOD: * Method name you invoked isn't known by the object you invoked it on. * @G_DBUS_ERROR_UNKNOWN_OBJECT: * Object you invoked a method on isn't known. Since 2.42 * @G_DBUS_ERROR_UNKNOWN_INTERFACE: * Interface you invoked a method on isn't known by the object. Since 2.42 * @G_DBUS_ERROR_UNKNOWN_PROPERTY: * Property you tried to access isn't known by the object. Since 2.42 * @G_DBUS_ERROR_PROPERTY_READ_ONLY: * Property you tried to set is read-only. Since 2.42 * @G_DBUS_ERROR_TIMED_OUT: * Certain timeout errors, e.g. while starting a service. Warning: this is * confusingly-named given that %G_DBUS_ERROR_TIMEOUT also exists. We * can't fix it for compatibility reasons so just be careful. * @G_DBUS_ERROR_MATCH_RULE_NOT_FOUND: * Tried to remove or modify a match rule that didn't exist. * @G_DBUS_ERROR_MATCH_RULE_INVALID: * The match rule isn't syntactically valid. * @G_DBUS_ERROR_SPAWN_EXEC_FAILED: * While starting a new process, the exec() call failed. * @G_DBUS_ERROR_SPAWN_FORK_FAILED: * While starting a new process, the fork() call failed. * @G_DBUS_ERROR_SPAWN_CHILD_EXITED: * While starting a new process, the child exited with a status code. * @G_DBUS_ERROR_SPAWN_CHILD_SIGNALED: * While starting a new process, the child exited on a signal. * @G_DBUS_ERROR_SPAWN_FAILED: * While starting a new process, something went wrong. * @G_DBUS_ERROR_SPAWN_SETUP_FAILED: * We failed to setup the environment correctly. * @G_DBUS_ERROR_SPAWN_CONFIG_INVALID: * We failed to setup the config parser correctly. * @G_DBUS_ERROR_SPAWN_SERVICE_INVALID: * Bus name was not valid. * @G_DBUS_ERROR_SPAWN_SERVICE_NOT_FOUND: * Service file not found in system-services directory. * @G_DBUS_ERROR_SPAWN_PERMISSIONS_INVALID: * Permissions are incorrect on the setuid helper. * @G_DBUS_ERROR_SPAWN_FILE_INVALID: * Service file invalid (Name, User or Exec missing). * @G_DBUS_ERROR_SPAWN_NO_MEMORY: * Tried to get a UNIX process ID and it wasn't available. * @G_DBUS_ERROR_UNIX_PROCESS_ID_UNKNOWN: * Tried to get a UNIX process ID and it wasn't available. * @G_DBUS_ERROR_INVALID_SIGNATURE: * A type signature is not valid. * @G_DBUS_ERROR_INVALID_FILE_CONTENT: * A file contains invalid syntax or is otherwise broken. * @G_DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN: * Asked for SELinux security context and it wasn't available. * @G_DBUS_ERROR_ADT_AUDIT_DATA_UNKNOWN: * Asked for ADT audit data and it wasn't available. * @G_DBUS_ERROR_OBJECT_PATH_IN_USE: * There's already an object with the requested object path. * * Error codes for the %G_DBUS_ERROR error domain. * * Since: 2.26 */ typedef enum { /* Well-known errors in the org.freedesktop.DBus.Error namespace */ G_DBUS_ERROR_FAILED, /* org.freedesktop.DBus.Error.Failed */ G_DBUS_ERROR_NO_MEMORY, /* org.freedesktop.DBus.Error.NoMemory */ G_DBUS_ERROR_SERVICE_UNKNOWN, /* org.freedesktop.DBus.Error.ServiceUnknown */ G_DBUS_ERROR_NAME_HAS_NO_OWNER, /* org.freedesktop.DBus.Error.NameHasNoOwner */ G_DBUS_ERROR_NO_REPLY, /* org.freedesktop.DBus.Error.NoReply */ G_DBUS_ERROR_IO_ERROR, /* org.freedesktop.DBus.Error.IOError */ G_DBUS_ERROR_BAD_ADDRESS, /* org.freedesktop.DBus.Error.BadAddress */ G_DBUS_ERROR_NOT_SUPPORTED, /* org.freedesktop.DBus.Error.NotSupported */ G_DBUS_ERROR_LIMITS_EXCEEDED, /* org.freedesktop.DBus.Error.LimitsExceeded */ G_DBUS_ERROR_ACCESS_DENIED, /* org.freedesktop.DBus.Error.AccessDenied */ G_DBUS_ERROR_AUTH_FAILED, /* org.freedesktop.DBus.Error.AuthFailed */ G_DBUS_ERROR_NO_SERVER, /* org.freedesktop.DBus.Error.NoServer */ G_DBUS_ERROR_TIMEOUT, /* org.freedesktop.DBus.Error.Timeout */ G_DBUS_ERROR_NO_NETWORK, /* org.freedesktop.DBus.Error.NoNetwork */ G_DBUS_ERROR_ADDRESS_IN_USE, /* org.freedesktop.DBus.Error.AddressInUse */ G_DBUS_ERROR_DISCONNECTED, /* org.freedesktop.DBus.Error.Disconnected */ G_DBUS_ERROR_INVALID_ARGS, /* org.freedesktop.DBus.Error.InvalidArgs */ G_DBUS_ERROR_FILE_NOT_FOUND, /* org.freedesktop.DBus.Error.FileNotFound */ G_DBUS_ERROR_FILE_EXISTS, /* org.freedesktop.DBus.Error.FileExists */ G_DBUS_ERROR_UNKNOWN_METHOD, /* org.freedesktop.DBus.Error.UnknownMethod */ G_DBUS_ERROR_TIMED_OUT, /* org.freedesktop.DBus.Error.TimedOut */ G_DBUS_ERROR_MATCH_RULE_NOT_FOUND, /* org.freedesktop.DBus.Error.MatchRuleNotFound */ G_DBUS_ERROR_MATCH_RULE_INVALID, /* org.freedesktop.DBus.Error.MatchRuleInvalid */ G_DBUS_ERROR_SPAWN_EXEC_FAILED, /* org.freedesktop.DBus.Error.Spawn.ExecFailed */ G_DBUS_ERROR_SPAWN_FORK_FAILED, /* org.freedesktop.DBus.Error.Spawn.ForkFailed */ G_DBUS_ERROR_SPAWN_CHILD_EXITED, /* org.freedesktop.DBus.Error.Spawn.ChildExited */ G_DBUS_ERROR_SPAWN_CHILD_SIGNALED, /* org.freedesktop.DBus.Error.Spawn.ChildSignaled */ G_DBUS_ERROR_SPAWN_FAILED, /* org.freedesktop.DBus.Error.Spawn.Failed */ G_DBUS_ERROR_SPAWN_SETUP_FAILED, /* org.freedesktop.DBus.Error.Spawn.FailedToSetup */ G_DBUS_ERROR_SPAWN_CONFIG_INVALID, /* org.freedesktop.DBus.Error.Spawn.ConfigInvalid */ G_DBUS_ERROR_SPAWN_SERVICE_INVALID, /* org.freedesktop.DBus.Error.Spawn.ServiceNotValid */ G_DBUS_ERROR_SPAWN_SERVICE_NOT_FOUND, /* org.freedesktop.DBus.Error.Spawn.ServiceNotFound */ G_DBUS_ERROR_SPAWN_PERMISSIONS_INVALID, /* org.freedesktop.DBus.Error.Spawn.PermissionsInvalid */ G_DBUS_ERROR_SPAWN_FILE_INVALID, /* org.freedesktop.DBus.Error.Spawn.FileInvalid */ G_DBUS_ERROR_SPAWN_NO_MEMORY, /* org.freedesktop.DBus.Error.Spawn.NoMemory */ G_DBUS_ERROR_UNIX_PROCESS_ID_UNKNOWN, /* org.freedesktop.DBus.Error.UnixProcessIdUnknown */ G_DBUS_ERROR_INVALID_SIGNATURE, /* org.freedesktop.DBus.Error.InvalidSignature */ G_DBUS_ERROR_INVALID_FILE_CONTENT, /* org.freedesktop.DBus.Error.InvalidFileContent */ G_DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN, /* org.freedesktop.DBus.Error.SELinuxSecurityContextUnknown */ G_DBUS_ERROR_ADT_AUDIT_DATA_UNKNOWN, /* org.freedesktop.DBus.Error.AdtAuditDataUnknown */ G_DBUS_ERROR_OBJECT_PATH_IN_USE, /* org.freedesktop.DBus.Error.ObjectPathInUse */ G_DBUS_ERROR_UNKNOWN_OBJECT, /* org.freedesktop.DBus.Error.UnknownObject */ G_DBUS_ERROR_UNKNOWN_INTERFACE, /* org.freedesktop.DBus.Error.UnknownInterface */ G_DBUS_ERROR_UNKNOWN_PROPERTY, /* org.freedesktop.DBus.Error.UnknownProperty */ G_DBUS_ERROR_PROPERTY_READ_ONLY /* org.freedesktop.DBus.Error.PropertyReadOnly */ } GDBusError; /* Remember to update g_dbus_error_quark() in gdbuserror.c if you extend this enumeration */ /** * GDBusConnectionFlags: * @G_DBUS_CONNECTION_FLAGS_NONE: No flags set. * @G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_CLIENT: Perform authentication against server. * @G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER: Perform authentication against client. * @G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS: When * authenticating as a server, allow the anonymous authentication * method. * @G_DBUS_CONNECTION_FLAGS_MESSAGE_BUS_CONNECTION: Pass this flag if connecting to a peer that is a * message bus. This means that the Hello() method will be invoked as part of the connection setup. * @G_DBUS_CONNECTION_FLAGS_DELAY_MESSAGE_PROCESSING: If set, processing of D-Bus messages is * delayed until g_dbus_connection_start_message_processing() is called. * * Flags used when creating a new #GDBusConnection. * * Since: 2.26 */ typedef enum { G_DBUS_CONNECTION_FLAGS_NONE = 0, G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_CLIENT = (1<<0), G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER = (1<<1), G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS = (1<<2), G_DBUS_CONNECTION_FLAGS_MESSAGE_BUS_CONNECTION = (1<<3), G_DBUS_CONNECTION_FLAGS_DELAY_MESSAGE_PROCESSING = (1<<4) } GDBusConnectionFlags; /** * GDBusCapabilityFlags: * @G_DBUS_CAPABILITY_FLAGS_NONE: No flags set. * @G_DBUS_CAPABILITY_FLAGS_UNIX_FD_PASSING: The connection * supports exchanging UNIX file descriptors with the remote peer. * * Capabilities negotiated with the remote peer. * * Since: 2.26 */ typedef enum { G_DBUS_CAPABILITY_FLAGS_NONE = 0, G_DBUS_CAPABILITY_FLAGS_UNIX_FD_PASSING = (1<<0) } GDBusCapabilityFlags; /** * GDBusCallFlags: * @G_DBUS_CALL_FLAGS_NONE: No flags set. * @G_DBUS_CALL_FLAGS_NO_AUTO_START: The bus must not launch * an owner for the destination name in response to this method * invocation. * @G_DBUS_CALL_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION: the caller is prepared to * wait for interactive authorization. Since 2.46. * * Flags used in g_dbus_connection_call() and similar APIs. * * Since: 2.26 */ typedef enum { G_DBUS_CALL_FLAGS_NONE = 0, G_DBUS_CALL_FLAGS_NO_AUTO_START = (1<<0), G_DBUS_CALL_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION = (1<<1) } GDBusCallFlags; /* (1<<31) is reserved for internal use by GDBusConnection, do not use it. */ /** * GDBusMessageType: * @G_DBUS_MESSAGE_TYPE_INVALID: Message is of invalid type. * @G_DBUS_MESSAGE_TYPE_METHOD_CALL: Method call. * @G_DBUS_MESSAGE_TYPE_METHOD_RETURN: Method reply. * @G_DBUS_MESSAGE_TYPE_ERROR: Error reply. * @G_DBUS_MESSAGE_TYPE_SIGNAL: Signal emission. * * Message types used in #GDBusMessage. * * Since: 2.26 */ typedef enum { G_DBUS_MESSAGE_TYPE_INVALID, G_DBUS_MESSAGE_TYPE_METHOD_CALL, G_DBUS_MESSAGE_TYPE_METHOD_RETURN, G_DBUS_MESSAGE_TYPE_ERROR, G_DBUS_MESSAGE_TYPE_SIGNAL } GDBusMessageType; /** * GDBusMessageFlags: * @G_DBUS_MESSAGE_FLAGS_NONE: No flags set. * @G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED: A reply is not expected. * @G_DBUS_MESSAGE_FLAGS_NO_AUTO_START: The bus must not launch an * owner for the destination name in response to this message. * @G_DBUS_MESSAGE_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION: If set on a method * call, this flag means that the caller is prepared to wait for interactive * authorization. Since 2.46. * * Message flags used in #GDBusMessage. * * Since: 2.26 */ typedef enum { G_DBUS_MESSAGE_FLAGS_NONE = 0, G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED = (1<<0), G_DBUS_MESSAGE_FLAGS_NO_AUTO_START = (1<<1), G_DBUS_MESSAGE_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION = (1<<2) } GDBusMessageFlags; /** * GDBusMessageHeaderField: * @G_DBUS_MESSAGE_HEADER_FIELD_INVALID: Not a valid header field. * @G_DBUS_MESSAGE_HEADER_FIELD_PATH: The object path. * @G_DBUS_MESSAGE_HEADER_FIELD_INTERFACE: The interface name. * @G_DBUS_MESSAGE_HEADER_FIELD_MEMBER: The method or signal name. * @G_DBUS_MESSAGE_HEADER_FIELD_ERROR_NAME: The name of the error that occurred. * @G_DBUS_MESSAGE_HEADER_FIELD_REPLY_SERIAL: The serial number the message is a reply to. * @G_DBUS_MESSAGE_HEADER_FIELD_DESTINATION: The name the message is intended for. * @G_DBUS_MESSAGE_HEADER_FIELD_SENDER: Unique name of the sender of the message (filled in by the bus). * @G_DBUS_MESSAGE_HEADER_FIELD_SIGNATURE: The signature of the message body. * @G_DBUS_MESSAGE_HEADER_FIELD_NUM_UNIX_FDS: The number of UNIX file descriptors that accompany the message. * * Header fields used in #GDBusMessage. * * Since: 2.26 */ typedef enum { G_DBUS_MESSAGE_HEADER_FIELD_INVALID, G_DBUS_MESSAGE_HEADER_FIELD_PATH, G_DBUS_MESSAGE_HEADER_FIELD_INTERFACE, G_DBUS_MESSAGE_HEADER_FIELD_MEMBER, G_DBUS_MESSAGE_HEADER_FIELD_ERROR_NAME, G_DBUS_MESSAGE_HEADER_FIELD_REPLY_SERIAL, G_DBUS_MESSAGE_HEADER_FIELD_DESTINATION, G_DBUS_MESSAGE_HEADER_FIELD_SENDER, G_DBUS_MESSAGE_HEADER_FIELD_SIGNATURE, G_DBUS_MESSAGE_HEADER_FIELD_NUM_UNIX_FDS } GDBusMessageHeaderField; /** * GDBusPropertyInfoFlags: * @G_DBUS_PROPERTY_INFO_FLAGS_NONE: No flags set. * @G_DBUS_PROPERTY_INFO_FLAGS_READABLE: Property is readable. * @G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE: Property is writable. * * Flags describing the access control of a D-Bus property. * * Since: 2.26 */ typedef enum { G_DBUS_PROPERTY_INFO_FLAGS_NONE = 0, G_DBUS_PROPERTY_INFO_FLAGS_READABLE = (1<<0), G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE = (1<<1) } GDBusPropertyInfoFlags; /** * GDBusSubtreeFlags: * @G_DBUS_SUBTREE_FLAGS_NONE: No flags set. * @G_DBUS_SUBTREE_FLAGS_DISPATCH_TO_UNENUMERATED_NODES: Method calls to objects not in the enumerated range * will still be dispatched. This is useful if you want * to dynamically spawn objects in the subtree. * * Flags passed to g_dbus_connection_register_subtree(). * * Since: 2.26 */ typedef enum { G_DBUS_SUBTREE_FLAGS_NONE = 0, G_DBUS_SUBTREE_FLAGS_DISPATCH_TO_UNENUMERATED_NODES = (1<<0) } GDBusSubtreeFlags; /** * GDBusServerFlags: * @G_DBUS_SERVER_FLAGS_NONE: No flags set. * @G_DBUS_SERVER_FLAGS_RUN_IN_THREAD: All #GDBusServer::new-connection * signals will run in separated dedicated threads (see signal for * details). * @G_DBUS_SERVER_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS: Allow the anonymous * authentication method. * * Flags used when creating a #GDBusServer. * * Since: 2.26 */ typedef enum { G_DBUS_SERVER_FLAGS_NONE = 0, G_DBUS_SERVER_FLAGS_RUN_IN_THREAD = (1<<0), G_DBUS_SERVER_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS = (1<<1) } GDBusServerFlags; /** * GDBusSignalFlags: * @G_DBUS_SIGNAL_FLAGS_NONE: No flags set. * @G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE: Don't actually send the AddMatch * D-Bus call for this signal subscription. This gives you more control * over which match rules you add (but you must add them manually). * @G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_NAMESPACE: Match first arguments that * contain a bus or interface name with the given namespace. * @G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_PATH: Match first arguments that * contain an object path that is either equivalent to the given path, * or one of the paths is a subpath of the other. * * Flags used when subscribing to signals via g_dbus_connection_signal_subscribe(). * * Since: 2.26 */ typedef enum /*< flags >*/ { G_DBUS_SIGNAL_FLAGS_NONE = 0, G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE = (1<<0), G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_NAMESPACE = (1<<1), G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_PATH = (1<<2) } GDBusSignalFlags; /** * GDBusSendMessageFlags: * @G_DBUS_SEND_MESSAGE_FLAGS_NONE: No flags set. * @G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL: Do not automatically * assign a serial number from the #GDBusConnection object when * sending a message. * * Flags used when sending #GDBusMessages on a #GDBusConnection. * * Since: 2.26 */ typedef enum { G_DBUS_SEND_MESSAGE_FLAGS_NONE = 0, G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL = (1<<0) } GDBusSendMessageFlags; /* (1<<31) is reserved for internal use by GDBusConnection, do not use it. */ /** * GCredentialsType: * @G_CREDENTIALS_TYPE_INVALID: Indicates an invalid native credential type. * @G_CREDENTIALS_TYPE_LINUX_UCRED: The native credentials type is a struct ucred. * @G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED: The native credentials type is a struct cmsgcred. * @G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED: The native credentials type is a struct sockpeercred. Added in 2.30. * @G_CREDENTIALS_TYPE_SOLARIS_UCRED: The native credentials type is a ucred_t. Added in 2.40. * @G_CREDENTIALS_TYPE_NETBSD_UNPCBID: The native credentials type is a struct unpcbid. * * Enumeration describing different kinds of native credential types. * * Since: 2.26 */ typedef enum { G_CREDENTIALS_TYPE_INVALID, G_CREDENTIALS_TYPE_LINUX_UCRED, G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED, G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED, G_CREDENTIALS_TYPE_SOLARIS_UCRED, G_CREDENTIALS_TYPE_NETBSD_UNPCBID } GCredentialsType; /** * GDBusMessageByteOrder: * @G_DBUS_MESSAGE_BYTE_ORDER_BIG_ENDIAN: The byte order is big endian. * @G_DBUS_MESSAGE_BYTE_ORDER_LITTLE_ENDIAN: The byte order is little endian. * * Enumeration used to describe the byte order of a D-Bus message. * * Since: 2.26 */ typedef enum { G_DBUS_MESSAGE_BYTE_ORDER_BIG_ENDIAN = 'B', G_DBUS_MESSAGE_BYTE_ORDER_LITTLE_ENDIAN = 'l' } GDBusMessageByteOrder; /** * GApplicationFlags: * @G_APPLICATION_FLAGS_NONE: Default * @G_APPLICATION_IS_SERVICE: Run as a service. In this mode, registration * fails if the service is already running, and the application * will initially wait up to 10 seconds for an initial activation * message to arrive. * @G_APPLICATION_IS_LAUNCHER: Don't try to become the primary instance. * @G_APPLICATION_HANDLES_OPEN: This application handles opening files (in * the primary instance). Note that this flag only affects the default * implementation of local_command_line(), and has no effect if * %G_APPLICATION_HANDLES_COMMAND_LINE is given. * See g_application_run() for details. * @G_APPLICATION_HANDLES_COMMAND_LINE: This application handles command line * arguments (in the primary instance). Note that this flag only affect * the default implementation of local_command_line(). * See g_application_run() for details. * @G_APPLICATION_SEND_ENVIRONMENT: Send the environment of the * launching process to the primary instance. Set this flag if your * application is expected to behave differently depending on certain * environment variables. For instance, an editor might be expected * to use the `GIT_COMMITTER_NAME` environment variable * when editing a git commit message. The environment is available * to the #GApplication::command-line signal handler, via * g_application_command_line_getenv(). * @G_APPLICATION_NON_UNIQUE: Make no attempts to do any of the typical * single-instance application negotiation, even if the application * ID is given. The application neither attempts to become the * owner of the application ID nor does it check if an existing * owner already exists. Everything occurs in the local process. * Since: 2.30. * @G_APPLICATION_CAN_OVERRIDE_APP_ID: Allow users to override the * application ID from the command line with `--gapplication-app-id`. * Since: 2.48 * * Flags used to define the behaviour of a #GApplication. * * Since: 2.28 **/ typedef enum { G_APPLICATION_FLAGS_NONE, G_APPLICATION_IS_SERVICE = (1 << 0), G_APPLICATION_IS_LAUNCHER = (1 << 1), G_APPLICATION_HANDLES_OPEN = (1 << 2), G_APPLICATION_HANDLES_COMMAND_LINE = (1 << 3), G_APPLICATION_SEND_ENVIRONMENT = (1 << 4), G_APPLICATION_NON_UNIQUE = (1 << 5), G_APPLICATION_CAN_OVERRIDE_APP_ID = (1 << 6) } GApplicationFlags; /** * GTlsError: * @G_TLS_ERROR_UNAVAILABLE: No TLS provider is available * @G_TLS_ERROR_MISC: Miscellaneous TLS error * @G_TLS_ERROR_BAD_CERTIFICATE: A certificate could not be parsed * @G_TLS_ERROR_NOT_TLS: The TLS handshake failed because the * peer does not seem to be a TLS server. * @G_TLS_ERROR_HANDSHAKE: The TLS handshake failed because the * peer's certificate was not acceptable. * @G_TLS_ERROR_CERTIFICATE_REQUIRED: The TLS handshake failed because * the server requested a client-side certificate, but none was * provided. See g_tls_connection_set_certificate(). * @G_TLS_ERROR_EOF: The TLS connection was closed without proper * notice, which may indicate an attack. See * g_tls_connection_set_require_close_notify(). * * An error code used with %G_TLS_ERROR in a #GError returned from a * TLS-related routine. * * Since: 2.28 */ typedef enum { G_TLS_ERROR_UNAVAILABLE, G_TLS_ERROR_MISC, G_TLS_ERROR_BAD_CERTIFICATE, G_TLS_ERROR_NOT_TLS, G_TLS_ERROR_HANDSHAKE, G_TLS_ERROR_CERTIFICATE_REQUIRED, G_TLS_ERROR_EOF } GTlsError; /** * GTlsCertificateFlags: * @G_TLS_CERTIFICATE_UNKNOWN_CA: The signing certificate authority is * not known. * @G_TLS_CERTIFICATE_BAD_IDENTITY: The certificate does not match the * expected identity of the site that it was retrieved from. * @G_TLS_CERTIFICATE_NOT_ACTIVATED: The certificate's activation time * is still in the future * @G_TLS_CERTIFICATE_EXPIRED: The certificate has expired * @G_TLS_CERTIFICATE_REVOKED: The certificate has been revoked * according to the #GTlsConnection's certificate revocation list. * @G_TLS_CERTIFICATE_INSECURE: The certificate's algorithm is * considered insecure. * @G_TLS_CERTIFICATE_GENERIC_ERROR: Some other error occurred validating * the certificate * @G_TLS_CERTIFICATE_VALIDATE_ALL: the combination of all of the above * flags * * A set of flags describing TLS certification validation. This can be * used to set which validation steps to perform (eg, with * g_tls_client_connection_set_validation_flags()), or to describe why * a particular certificate was rejected (eg, in * #GTlsConnection::accept-certificate). * * Since: 2.28 */ typedef enum { G_TLS_CERTIFICATE_UNKNOWN_CA = (1 << 0), G_TLS_CERTIFICATE_BAD_IDENTITY = (1 << 1), G_TLS_CERTIFICATE_NOT_ACTIVATED = (1 << 2), G_TLS_CERTIFICATE_EXPIRED = (1 << 3), G_TLS_CERTIFICATE_REVOKED = (1 << 4), G_TLS_CERTIFICATE_INSECURE = (1 << 5), G_TLS_CERTIFICATE_GENERIC_ERROR = (1 << 6), G_TLS_CERTIFICATE_VALIDATE_ALL = 0x007f } GTlsCertificateFlags; /** * GTlsAuthenticationMode: * @G_TLS_AUTHENTICATION_NONE: client authentication not required * @G_TLS_AUTHENTICATION_REQUESTED: client authentication is requested * @G_TLS_AUTHENTICATION_REQUIRED: client authentication is required * * The client authentication mode for a #GTlsServerConnection. * * Since: 2.28 */ typedef enum { G_TLS_AUTHENTICATION_NONE, G_TLS_AUTHENTICATION_REQUESTED, G_TLS_AUTHENTICATION_REQUIRED } GTlsAuthenticationMode; /** * GTlsRehandshakeMode: * @G_TLS_REHANDSHAKE_NEVER: Never allow rehandshaking * @G_TLS_REHANDSHAKE_SAFELY: Allow safe rehandshaking only * @G_TLS_REHANDSHAKE_UNSAFELY: Allow unsafe rehandshaking * * When to allow rehandshaking. See * g_tls_connection_set_rehandshake_mode(). * * Since: 2.28 */ typedef enum { G_TLS_REHANDSHAKE_NEVER, G_TLS_REHANDSHAKE_SAFELY, G_TLS_REHANDSHAKE_UNSAFELY } GTlsRehandshakeMode; /** * GTlsPasswordFlags: * @G_TLS_PASSWORD_NONE: No flags * @G_TLS_PASSWORD_RETRY: The password was wrong, and the user should retry. * @G_TLS_PASSWORD_MANY_TRIES: Hint to the user that the password has been * wrong many times, and the user may not have many chances left. * @G_TLS_PASSWORD_FINAL_TRY: Hint to the user that this is the last try to get * this password right. * * Various flags for the password. * * Since: 2.30 */ typedef enum _GTlsPasswordFlags { G_TLS_PASSWORD_NONE = 0, G_TLS_PASSWORD_RETRY = 1 << 1, G_TLS_PASSWORD_MANY_TRIES = 1 << 2, G_TLS_PASSWORD_FINAL_TRY = 1 << 3 } GTlsPasswordFlags; /** * GTlsInteractionResult: * @G_TLS_INTERACTION_UNHANDLED: The interaction was unhandled (i.e. not * implemented). * @G_TLS_INTERACTION_HANDLED: The interaction completed, and resulting data * is available. * @G_TLS_INTERACTION_FAILED: The interaction has failed, or was cancelled. * and the operation should be aborted. * * #GTlsInteractionResult is returned by various functions in #GTlsInteraction * when finishing an interaction request. * * Since: 2.30 */ typedef enum { G_TLS_INTERACTION_UNHANDLED, G_TLS_INTERACTION_HANDLED, G_TLS_INTERACTION_FAILED } GTlsInteractionResult; /** * GDBusInterfaceSkeletonFlags: * @G_DBUS_INTERFACE_SKELETON_FLAGS_NONE: No flags set. * @G_DBUS_INTERFACE_SKELETON_FLAGS_HANDLE_METHOD_INVOCATIONS_IN_THREAD: Each method invocation is handled in * a thread dedicated to the invocation. This means that the method implementation can use blocking IO * without blocking any other part of the process. It also means that the method implementation must * use locking to access data structures used by other threads. * * Flags describing the behavior of a #GDBusInterfaceSkeleton instance. * * Since: 2.30 */ typedef enum { G_DBUS_INTERFACE_SKELETON_FLAGS_NONE = 0, G_DBUS_INTERFACE_SKELETON_FLAGS_HANDLE_METHOD_INVOCATIONS_IN_THREAD = (1<<0) } GDBusInterfaceSkeletonFlags; /** * GDBusObjectManagerClientFlags: * @G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_NONE: No flags set. * @G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_DO_NOT_AUTO_START: If not set and the * manager is for a well-known name, then request the bus to launch * an owner for the name if no-one owns the name. This flag can only * be used in managers for well-known names. * * Flags used when constructing a #GDBusObjectManagerClient. * * Since: 2.30 */ typedef enum { G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_NONE = 0, G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_DO_NOT_AUTO_START = (1<<0) } GDBusObjectManagerClientFlags; /** * GTlsDatabaseVerifyFlags: * @G_TLS_DATABASE_VERIFY_NONE: No verification flags * * Flags for g_tls_database_verify_chain(). * * Since: 2.30 */ typedef enum /*< flags >*/ { G_TLS_DATABASE_VERIFY_NONE = 0 } GTlsDatabaseVerifyFlags; /** * GTlsDatabaseLookupFlags: * @G_TLS_DATABASE_LOOKUP_NONE: No lookup flags * @G_TLS_DATABASE_LOOKUP_KEYPAIR: Restrict lookup to certificates that have * a private key. * * Flags for g_tls_database_lookup_certificate_for_handle(), * g_tls_database_lookup_certificate_issuer(), * and g_tls_database_lookup_certificates_issued_by(). * * Since: 2.30 */ typedef enum { G_TLS_DATABASE_LOOKUP_NONE = 0, G_TLS_DATABASE_LOOKUP_KEYPAIR = 1 } GTlsDatabaseLookupFlags; /** * GTlsCertificateRequestFlags: * @G_TLS_CERTIFICATE_REQUEST_NONE: No flags * * Flags for g_tls_interaction_request_certificate(), * g_tls_interaction_request_certificate_async(), and * g_tls_interaction_invoke_request_certificate(). * * Since: 2.40 */ typedef enum { G_TLS_CERTIFICATE_REQUEST_NONE = 0 } GTlsCertificateRequestFlags; /** * GIOModuleScopeFlags: * @G_IO_MODULE_SCOPE_NONE: No module scan flags * @G_IO_MODULE_SCOPE_BLOCK_DUPLICATES: When using this scope to load or * scan modules, automatically block a modules which has the same base * basename as previously loaded module. * * Flags for use with g_io_module_scope_new(). * * Since: 2.30 */ typedef enum { G_IO_MODULE_SCOPE_NONE, G_IO_MODULE_SCOPE_BLOCK_DUPLICATES } GIOModuleScopeFlags; /** * GSocketClientEvent: * @G_SOCKET_CLIENT_RESOLVING: The client is doing a DNS lookup. * @G_SOCKET_CLIENT_RESOLVED: The client has completed a DNS lookup. * @G_SOCKET_CLIENT_CONNECTING: The client is connecting to a remote * host (either a proxy or the destination server). * @G_SOCKET_CLIENT_CONNECTED: The client has connected to a remote * host. * @G_SOCKET_CLIENT_PROXY_NEGOTIATING: The client is negotiating * with a proxy to connect to the destination server. * @G_SOCKET_CLIENT_PROXY_NEGOTIATED: The client has negotiated * with the proxy server. * @G_SOCKET_CLIENT_TLS_HANDSHAKING: The client is performing a * TLS handshake. * @G_SOCKET_CLIENT_TLS_HANDSHAKED: The client has performed a * TLS handshake. * @G_SOCKET_CLIENT_COMPLETE: The client is done with a particular * #GSocketConnectable. * * Describes an event occurring on a #GSocketClient. See the * #GSocketClient::event signal for more details. * * Additional values may be added to this type in the future. * * Since: 2.32 */ typedef enum { G_SOCKET_CLIENT_RESOLVING, G_SOCKET_CLIENT_RESOLVED, G_SOCKET_CLIENT_CONNECTING, G_SOCKET_CLIENT_CONNECTED, G_SOCKET_CLIENT_PROXY_NEGOTIATING, G_SOCKET_CLIENT_PROXY_NEGOTIATED, G_SOCKET_CLIENT_TLS_HANDSHAKING, G_SOCKET_CLIENT_TLS_HANDSHAKED, G_SOCKET_CLIENT_COMPLETE } GSocketClientEvent; /** * GSocketListenerEvent: * @G_SOCKET_LISTENER_BINDING: The listener is about to bind a socket. * @G_SOCKET_LISTENER_BOUND: The listener has bound a socket. * @G_SOCKET_LISTENER_LISTENING: The listener is about to start * listening on this socket. * @G_SOCKET_LISTENER_LISTENED: The listener is now listening on * this socket. * * Describes an event occurring on a #GSocketListener. See the * #GSocketListener::event signal for more details. * * Additional values may be added to this type in the future. * * Since: 2.46 */ typedef enum { G_SOCKET_LISTENER_BINDING, G_SOCKET_LISTENER_BOUND, G_SOCKET_LISTENER_LISTENING, G_SOCKET_LISTENER_LISTENED } GSocketListenerEvent; /** * GTestDBusFlags: * @G_TEST_DBUS_NONE: No flags. * * Flags to define future #GTestDBus behaviour. * * Since: 2.34 */ typedef enum /*< flags >*/ { G_TEST_DBUS_NONE = 0 } GTestDBusFlags; /** * GSubprocessFlags: * @G_SUBPROCESS_FLAGS_NONE: No flags. * @G_SUBPROCESS_FLAGS_STDIN_PIPE: create a pipe for the stdin of the * spawned process that can be accessed with * g_subprocess_get_stdin_pipe(). * @G_SUBPROCESS_FLAGS_STDIN_INHERIT: stdin is inherited from the * calling process. * @G_SUBPROCESS_FLAGS_STDOUT_PIPE: create a pipe for the stdout of the * spawned process that can be accessed with * g_subprocess_get_stdout_pipe(). * @G_SUBPROCESS_FLAGS_STDOUT_SILENCE: silence the stdout of the spawned * process (ie: redirect to `/dev/null`). * @G_SUBPROCESS_FLAGS_STDERR_PIPE: create a pipe for the stderr of the * spawned process that can be accessed with * g_subprocess_get_stderr_pipe(). * @G_SUBPROCESS_FLAGS_STDERR_SILENCE: silence the stderr of the spawned * process (ie: redirect to `/dev/null`). * @G_SUBPROCESS_FLAGS_STDERR_MERGE: merge the stderr of the spawned * process with whatever the stdout happens to be. This is a good way * of directing both streams to a common log file, for example. * @G_SUBPROCESS_FLAGS_INHERIT_FDS: spawned processes will inherit the * file descriptors of their parent, unless those descriptors have * been explicitly marked as close-on-exec. This flag has no effect * over the "standard" file descriptors (stdin, stdout, stderr). * * Flags to define the behaviour of a #GSubprocess. * * Note that the default for stdin is to redirect from `/dev/null`. For * stdout and stderr the default are for them to inherit the * corresponding descriptor from the calling process. * * Note that it is a programmer error to mix 'incompatible' flags. For * example, you may not request both %G_SUBPROCESS_FLAGS_STDOUT_PIPE and * %G_SUBPROCESS_FLAGS_STDOUT_SILENCE. * * Since: 2.40 **/ typedef enum { G_SUBPROCESS_FLAGS_NONE = 0, G_SUBPROCESS_FLAGS_STDIN_PIPE = (1u << 0), G_SUBPROCESS_FLAGS_STDIN_INHERIT = (1u << 1), G_SUBPROCESS_FLAGS_STDOUT_PIPE = (1u << 2), G_SUBPROCESS_FLAGS_STDOUT_SILENCE = (1u << 3), G_SUBPROCESS_FLAGS_STDERR_PIPE = (1u << 4), G_SUBPROCESS_FLAGS_STDERR_SILENCE = (1u << 5), G_SUBPROCESS_FLAGS_STDERR_MERGE = (1u << 6), G_SUBPROCESS_FLAGS_INHERIT_FDS = (1u << 7) } GSubprocessFlags; /** * GNotificationPriority: * @G_NOTIFICATION_PRIORITY_LOW: for notifications that do not require * immediate attention - typically used for contextual background * information, such as contact birthdays or local weather * @G_NOTIFICATION_PRIORITY_NORMAL: the default priority, to be used for the * majority of notifications (for example email messages, software updates, * completed download/sync operations) * @G_NOTIFICATION_PRIORITY_HIGH: for events that require more attention, * usually because responses are time-sensitive (for example chat and SMS * messages or alarms) * @G_NOTIFICATION_PRIORITY_URGENT: for urgent notifications, or notifications * that require a response in a short space of time (for example phone calls * or emergency warnings) * * Priority levels for #GNotifications. * * Since: 2.42 */ typedef enum { G_NOTIFICATION_PRIORITY_NORMAL, G_NOTIFICATION_PRIORITY_LOW, G_NOTIFICATION_PRIORITY_HIGH, G_NOTIFICATION_PRIORITY_URGENT } GNotificationPriority; /** * GNetworkConnectivity: * @G_NETWORK_CONNECTIVITY_LOCAL: The host is not configured with a * route to the Internet; it may or may not be connected to a local * network. * @G_NETWORK_CONNECTIVITY_LIMITED: The host is connected to a network, but * does not appear to be able to reach the full Internet, perhaps * due to upstream network problems. * @G_NETWORK_CONNECTIVITY_PORTAL: The host is behind a captive portal and * cannot reach the full Internet. * @G_NETWORK_CONNECTIVITY_FULL: The host is connected to a network, and * appears to be able to reach the full Internet. * * The host's network connectivity state, as reported by #GNetworkMonitor. * * Since: 2.44 */ typedef enum { G_NETWORK_CONNECTIVITY_LOCAL = 1, G_NETWORK_CONNECTIVITY_LIMITED = 2, G_NETWORK_CONNECTIVITY_PORTAL = 3, G_NETWORK_CONNECTIVITY_FULL = 4 } GNetworkConnectivity; G_END_DECLS #endif /* __GIO_ENUMS_H__ */