trAvis - MANAGER

Edit File: Makefile

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# libmp3lame/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

# global section for every Makefile.am

pkgdatadir = $(datadir)/lame
pkgincludedir = $(includedir)/lame
pkglibdir = $(libdir)/lame
pkglibexecdir = $(libexecdir)/lame
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
ANSI2KNR = $(top_srcdir)/ansi2knr
DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(top_srcdir)/Makefile.am.global depcomp
subdir = libmp3lame
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(libdir)"
LTLIBRARIES = $(lib_LTLIBRARIES)
am__DEPENDENCIES_1 = $(top_builddir)/mpglib/libmpgdecoder.la
am__DEPENDENCIES_2 =
libmp3lame_la_DEPENDENCIES = $(cpu_ldadd) $(vector_ldadd) \
	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_2)
am_libmp3lame_la_OBJECTS = VbrTag$U.lo bitstream$U.lo encoder$U.lo \
	fft$U.lo gain_analysis$U.lo id3tag$U.lo lame$U.lo newmdct$U.lo \
	presets$U.lo psymodel$U.lo quantize$U.lo quantize_pvt$U.lo \
	reservoir$U.lo set_get$U.lo tables$U.lo takehiro$U.lo \
	util$U.lo vbrquantize$U.lo version$U.lo mpglib_interface$U.lo
libmp3lame_la_OBJECTS = $(am_libmp3lame_la_OBJECTS)
libmp3lame_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(libmp3lame_la_LDFLAGS) $(LDFLAGS) -o $@
DEFAULT_INCLUDES = -I. -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
SOURCES = $(libmp3lame_la_SOURCES)
DIST_SOURCES = $(libmp3lame_la_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
HEADERS = $(noinst_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^$[^/]*$/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/$[^/]*$$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = ${SHELL} /usr/local/src/lame-3.99.5/missing --run aclocal-1.11
ALLOCA = 
AMTAR = ${SHELL} /usr/local/src/lame-3.99.5/missing --run tar
AR = ar
AUTOCONF = ${SHELL} /usr/local/src/lame-3.99.5/missing --run autoconf
AUTOHEADER = ${SHELL} /usr/local/src/lame-3.99.5/missing --run autoheader
AUTOMAKE = ${SHELL} /usr/local/src/lame-3.99.5/missing --run automake-1.11
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -O3 -fomit-frame-pointer -ffast-math -Wall -pipe 
CONFIG_DEFS = 
CONFIG_MATH_LIB = -lm
CPP = gcc -E
CPPFLAGS = 
CPUCCODE = 
CPUTYPE = no
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H 
DEPDIR = .deps
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
EXEEXT = 
FGREP = /usr/bin/grep -F
FRONTEND_CFLAGS =  
FRONTEND_LDADD = -lncurses   -lm
FRONTEND_LDFLAGS =  -static
GREP = /usr/bin/grep
GTK_CFLAGS = 
GTK_CONFIG = no
GTK_LIBS = 
INCLUDES = -I$(top_srcdir)/include -I$(srcdir) -I$(top_srcdir)/mpglib -I$(top_builddir)
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/bin/ld -m elf_x86_64
LDADD = 
LDFLAGS = 
LIBICONV = 
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBTOOL_DEPS = ./ltmain.sh
LIB_MAJOR_VERSION = 0
LIB_MINOR_VERSION = 0
LIPO = 
LN_S = ln -s
LTLIBICONV = 
LTLIBOBJS = 
MAINT = #
MAKEDEP = -M
MAKEINFO = ${SHELL} /usr/local/src/lame-3.99.5/missing --run makeinfo
MKDIR_P = /usr/bin/mkdir -p
NASM = no
NASM_FORMAT = -f elf
NM = /usr/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = lame
PACKAGE_BUGREPORT = lame-dev@lists.sf.net
PACKAGE_NAME = lame
PACKAGE_STRING = lame 3.99.5
PACKAGE_TARNAME = lame
PACKAGE_URL = 
PACKAGE_VERSION = 3.99.5
PATH_SEPARATOR = :
PKG_CONFIG = 
PKG_CONFIG_LIBDIR = 
PKG_CONFIG_PATH = 
RANLIB = ranlib
RM_F = rm -f
SED = /usr/bin/sed
SET_MAKE = 
SHELL = /bin/sh
SNDFILE_CFLAGS = 
SNDFILE_LIBS = 
STRIP = strip
U = 
VERSION = 3.99.5
WITH_FRONTEND = lame
WITH_MP3RTP = 
WITH_MP3X = 
abs_builddir = /usr/local/src/lame-3.99.5/libmp3lame
abs_srcdir = /usr/local/src/lame-3.99.5/libmp3lame
abs_top_builddir = /usr/local/src/lame-3.99.5
abs_top_srcdir = /usr/local/src/lame-3.99.5
ac_ct_CC = gcc
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-unknown-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /usr/local/src/lame-3.99.5/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /usr/bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target_alias = 
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
AUTOMAKE_OPTIONS = 1.11 foreign $(top_srcdir)/ansi2knr
SUBDIRS = i386 vector
lib_LTLIBRARIES = libmp3lame.la
#cpu_ldadd = $(top_builddir)/libmp3lame/no/liblameasmroutines.la
vector_ldadd = $(top_builddir)/libmp3lame/vector/liblamevectorroutines.la
#decoder_ldadd = 
decoder_ldadd = $(top_builddir)/mpglib/libmpgdecoder.la
libmp3lame_la_LIBADD = $(cpu_ldadd) $(vector_ldadd) $(decoder_ldadd) \
			$(CONFIG_MATH_LIB)

libmp3lame_la_LDFLAGS = -version-info 0:0 \
			-no-undefined

EXTRA_DIST = \
	lame.rc \
	vbrquantize.h \
	logoe.ico

libmp3lame_la_SOURCES = \
        VbrTag.c \
	bitstream.c \
	encoder.c \
	fft.c \
	gain_analysis.c \
        id3tag.c \
        lame.c \
        newmdct.c \
	presets.c \
	psymodel.c \
	quantize.c \
	quantize_pvt.c \
	reservoir.c \
	set_get.c \
	tables.c \
	takehiro.c \
	util.c \
	vbrquantize.c \
	version.c \
	mpglib_interface.c

noinst_HEADERS = \
	VbrTag.h \
	bitstream.h \
	encoder.h \
	fft.h \
	gain_analysis.h \
	id3tag.h \
	l3side.h \
	lame-analysis.h \
	lame_global_flags.h \
	lameerror.h \
	machine.h \
	newmdct.h \
	psymodel.h \
	quantize.h  \
	quantize_pvt.h \
	reservoir.h \
	set_get.h \
	tables.h \
	util.h \
	vbrquantize.h \
	version.h

CLEANFILES = lclint.txt
LCLINTFLAGS = \
	+posixlib \
	+showsummary \
	+showalluses \
	+whichlib \
	+forcehints \
	-fixedformalarray \
	+matchanyintegral \
	-Dlint

all: all-recursive

.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/Makefile.am.global $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libmp3lame/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign libmp3lame/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
	list2=; for p in $$list; do \
	  if test -f $$p; then \
	    list2="$$list2 $$p"; \
	  else :; fi; \
	done; \
	test -z "$$list2" || { \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
	}

uninstall-libLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
	done

clean-libLTLIBRARIES:
	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
libmp3lame.la: $(libmp3lame_la_OBJECTS) $(libmp3lame_la_DEPENDENCIES) 
	$(libmp3lame_la_LINK) -rpath $(libdir) $(libmp3lame_la_OBJECTS) $(libmp3lame_la_LIBADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c
$(top_srcdir)/ansi2knr:
	$(am__cd) $(top_srcdir) && $(MAKE) $(AM_MAKEFLAGS) ./ansi2knr

mostlyclean-kr:
	-test "$U" = "" || rm -f *_.c

include ./$(DEPDIR)/VbrTag$U.Plo
include ./$(DEPDIR)/bitstream$U.Plo
include ./$(DEPDIR)/encoder$U.Plo
include ./$(DEPDIR)/fft$U.Plo
include ./$(DEPDIR)/gain_analysis$U.Plo
include ./$(DEPDIR)/id3tag$U.Plo
include ./$(DEPDIR)/lame$U.Plo
include ./$(DEPDIR)/mpglib_interface$U.Plo
include ./$(DEPDIR)/newmdct$U.Plo
include ./$(DEPDIR)/presets$U.Plo
include ./$(DEPDIR)/psymodel$U.Plo
include ./$(DEPDIR)/quantize$U.Plo
include ./$(DEPDIR)/quantize_pvt$U.Plo
include ./$(DEPDIR)/reservoir$U.Plo
include ./$(DEPDIR)/set_get$U.Plo
include ./$(DEPDIR)/tables$U.Plo
include ./$(DEPDIR)/takehiro$U.Plo
include ./$(DEPDIR)/util$U.Plo
include ./$(DEPDIR)/vbrquantize$U.Plo
include ./$(DEPDIR)/version$U.Plo

.c.o:
	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c $<

.c.obj:
	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
#	source='$<' object='$@' libtool=yes \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(LTCOMPILE) -c -o $@ $<
VbrTag_.c: VbrTag.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/VbrTag.c; then echo $(srcdir)/VbrTag.c; else echo VbrTag.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
bitstream_.c: bitstream.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/bitstream.c; then echo $(srcdir)/bitstream.c; else echo bitstream.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
encoder_.c: encoder.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/encoder.c; then echo $(srcdir)/encoder.c; else echo encoder.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
fft_.c: fft.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/fft.c; then echo $(srcdir)/fft.c; else echo fft.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
gain_analysis_.c: gain_analysis.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/gain_analysis.c; then echo $(srcdir)/gain_analysis.c; else echo gain_analysis.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
id3tag_.c: id3tag.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/id3tag.c; then echo $(srcdir)/id3tag.c; else echo id3tag.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
lame_.c: lame.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/lame.c; then echo $(srcdir)/lame.c; else echo lame.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
mpglib_interface_.c: mpglib_interface.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/mpglib_interface.c; then echo $(srcdir)/mpglib_interface.c; else echo mpglib_interface.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
newmdct_.c: newmdct.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/newmdct.c; then echo $(srcdir)/newmdct.c; else echo newmdct.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
presets_.c: presets.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/presets.c; then echo $(srcdir)/presets.c; else echo presets.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
psymodel_.c: psymodel.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/psymodel.c; then echo $(srcdir)/psymodel.c; else echo psymodel.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
quantize_.c: quantize.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/quantize.c; then echo $(srcdir)/quantize.c; else echo quantize.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
quantize_pvt_.c: quantize_pvt.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/quantize_pvt.c; then echo $(srcdir)/quantize_pvt.c; else echo quantize_pvt.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
reservoir_.c: reservoir.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/reservoir.c; then echo $(srcdir)/reservoir.c; else echo reservoir.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
set_get_.c: set_get.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/set_get.c; then echo $(srcdir)/set_get.c; else echo set_get.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
tables_.c: tables.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/tables.c; then echo $(srcdir)/tables.c; else echo tables.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
takehiro_.c: takehiro.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/takehiro.c; then echo $(srcdir)/takehiro.c; else echo takehiro.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
util_.c: util.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/util.c; then echo $(srcdir)/util.c; else echo util.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
vbrquantize_.c: vbrquantize.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/vbrquantize.c; then echo $(srcdir)/vbrquantize.c; else echo vbrquantize.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
version_.c: version.c $(ANSI2KNR)
	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/version.c; then echo $(srcdir)/version.c; else echo version.c; fi` | sed 's/^# $[0-9]$/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
VbrTag_.$(OBJEXT) VbrTag_.lo bitstream_.$(OBJEXT) bitstream_.lo \
encoder_.$(OBJEXT) encoder_.lo fft_.$(OBJEXT) fft_.lo \
gain_analysis_.$(OBJEXT) gain_analysis_.lo id3tag_.$(OBJEXT) \
id3tag_.lo lame_.$(OBJEXT) lame_.lo mpglib_interface_.$(OBJEXT) \
mpglib_interface_.lo newmdct_.$(OBJEXT) newmdct_.lo presets_.$(OBJEXT) \
presets_.lo psymodel_.$(OBJEXT) psymodel_.lo quantize_.$(OBJEXT) \
quantize_.lo quantize_pvt_.$(OBJEXT) quantize_pvt_.lo \
reservoir_.$(OBJEXT) reservoir_.lo set_get_.$(OBJEXT) set_get_.lo \
tables_.$(OBJEXT) tables_.lo takehiro_.$(OBJEXT) takehiro_.lo \
util_.$(OBJEXT) util_.lo vbrquantize_.$(OBJEXT) vbrquantize_.lo \
version_.$(OBJEXT) version_.lo : $(ANSI2KNR)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(LTLIBRARIES) $(HEADERS)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(libdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
	mostlyclean-am

distclean: distclean-recursive
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-libLTLIBRARIES

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic mostlyclean-kr \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-libLTLIBRARIES

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
	$(top_srcdir)/ansi2knr ctags-recursive install-am \
	install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am check check-am clean clean-generic \
	clean-libLTLIBRARIES clean-libtool ctags ctags-recursive \
	distclean distclean-compile distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-libLTLIBRARIES install-man install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-compile mostlyclean-generic mostlyclean-kr \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am uninstall-libLTLIBRARIES

# end global section

lclint.txt: ${libmp3lame_la_SOURCES} ${noinst_HEADERS}
	@lclint ${LCLINTFLAGS} ${INCLUDES} ${DEFS} ${libmp3lame_la_SOURCES} 2>&1 >lclint.txt || true

lclint: lclint.txt
	more lclint.txt

#$(OBJECTS): libtool
#libtool: $(LIBTOOL_DEPS)
#	$(SHELL) $(top_builddir)/config.status --recheck

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: